Why is your ad budget going to waste? 7 places to check in your account
Picture a boiler repair company in Croydon, London. It has a £100 monthly ad budget, the ads run every day, and the clicks come in. But the phone doesn't ring as much as the budget deserves. When we open the account and look at the last 30 days, the picture is no surprise: about a third of the money went to people who weren't searching for a boiler engineer at all.
This isn't an exaggeration; it is the situation we meet most often in small business accounts. The good news: what drains the budget usually hides in the same seven places, and checking each one takes a few minutes.
A budget is usually wasted not because too little money is set aside, but because ads are shown to the wrong people. Irrelevant searches, missing negative keywords, a location setting left too broad, broken conversion tracking and a landing page that doesn't match the ad are the five most common causes. Start with the search terms report; on its own it saves the most money.
- People looking for a service£60
- Irrelevant searches£22
- Areas you don't serve£11
- Clicks to the wrong page£7
Wasted: £0 (40% of the budget)
The numbers are an illustration; your own account's breakdown will be different.
1. Nobody checks who actually sees your ad
In Google Ads, the keyword you pick and what people actually type are not the same thing. The keyword "boiler service" can also show your ad for "gas engineer job opening", "how to repressurise a boiler" or "second-hand boiler". None of these people will book a service, but every click they make is charged.
The real searches that trigger your ad are shown in the search terms report. Google provides this report so you can see which searches your ad was shown for and clicked on. It also notes that it doesn't list terms without enough search volume, for privacy reasons; so what you see in the report is not the whole picture, but it is the biggest part.
What to do: Sort the last 30 days of search terms by spend and read the top 20 rows one by one. Every row where your answer to "Would this person become my customer?" is no is the subject of the next item.
2. The negative keyword list is missing or half done
A negative keyword tells Google which searches your ad should not be shown for. Words like "job opening", "salary", "how to", "user manual" and "second hand" are safe starting points for almost any business that sells services.
There are two traps here, and the second one is specific to Turkish searches:
- Add plurals and synonyms separately. Google states plainly that negative keywords don't automatically cover synonyms or singular and plural forms. A negative of "job" doesn't always block the search "jobs".
- Think about spellings with and without Turkish characters together. Google says it takes misspellings into account, but in an account we manage, a negative written without Turkish characters ("turkon") did not stop the search "türkon". If a term is common, adding both spellings is safest.
What to do: Add the irrelevant words from the search terms report in their root forms rather than one by one. Before adding, also check that you aren't blocking one of your own keywords; a negative of "price" also cuts off real customers who ask about price.
3. The location setting is open to places you don't serve
Choosing London in a campaign doesn't mean your ad is shown only to people in London. Google's default and recommended setting is "Presence or interest": in addition to people located in the target area, the ad is also shown to people who show interest in that area. Someone living in Manchester who searches for "boiler service in London" counts as your prospect with this setting.
What to do: If you serve customers on site (service, cleaning, moving, clinic), open the location options in the campaign settings and switch to "Presence". For an e-commerce site that ships all over the UK, the default setting is often not a problem.
4. Conversion tracking isn't working or counts the wrong thing
If you don't know which keyword makes the phone ring, you can't know which one to stop. Google also describes conversion measurement as a prerequisite for seeing which keywords, ads and campaigns bring valuable customers, and for smart bidding strategies to work.
We see three common situations:
- The tag is on the site but no records come in. On one client's site the conversion tags were in place, yet not a single record arrived in 30 days. The tag was there; the event that would fire it was not.
- The wrong thing is counted. Counting page views or "visited the contact page" as a conversion makes the account look successful but doesn't show real customers.
- Phone calls aren't measured at all. If most customers arrive by calling and calls aren't measured, your best-performing keywords look like the worst ones on paper.
What to do: In the Goals section, look at the number of records each conversion action got in the last 30 days. If one shows zero, press the relevant button or form on your site yourself and test whether a record comes in.
5. The ad says one thing, the page says another
Someone searches for "home appliance repair", sees the headline "Home Appliance Repair" in the ad, clicks, and lands on a generic home page. A visitor who can't find what they were looking for leaves within seconds, and you have paid for the click. We saw exactly this in one account: the service page address redirected to the home page, and the Quality Score of those keywords was at the lowest level.
What to do: Open the final URLs of your three highest-spending ads on your phone. Does the page open slowly, does the headline name the service people searched for, is the call or WhatsApp button on the first screen? If the answer to any of these three is no, the problem is on the page, not in the ad.
6. Dozens of different keywords in one ad group
One of the accounts we reviewed had 118 active keywords in a single ad group. The same ad text was trying to be shown for very different searches. The result is predictable: the text matches no search exactly, the click-through rate drops, and Google asks for more expensive clicks for ads it finds less relevant.
What to do: Keep keywords with the same intent together ("boiler service", "boiler maintenance") and split different services into separate groups ("new boiler installation" apart, "radiator repair" apart). Let the headlines of each group contain the keywords in that group.
7. Smart bidding is switched on too early or changed constantly
Smart bidding strategies such as "Maximize conversions" make their decisions from past conversion data. Google states that these strategies go through a learning period of 7 to 14 days, and that changing the budget, target or conversion settings often during this time can restart learning. Turning on smart bidding in an account without working conversion tracking means leaving the system blindfolded.
What to do: First fix the measurement in item 4. After switching to smart bidding, don't touch the settings for at least two weeks; if a change is needed, make it in small steps.
A 20-minute checklist
You don't have to look at everything at once. In order, starting with the biggest impact:
- Search terms: Read the 20 highest-spending terms of the last 30 days. (5 min)
- Negative keywords: Add the irrelevant ones in their root forms, without clashing with your own keywords. (5 min)
- Location: If you serve on site, switch to "Presence". (2 min)
- Conversion tracking: See whether any conversion action has zero records. (3 min)
- Landing page: Open the addresses of your three highest-spending ads on your phone. (3 min)
- Ad groups and bidding: Note groups with more than 30 keywords and bid settings that changed in the last two weeks. (2 min)
How do you check this in AdMergen?
Every item in the list above appears on a separate screen in AdMergen:
- In the Search terms tab you select the irrelevant rows and add them as negatives in one click. Before adding, it checks whether that negative would block one of your own keywords.
- The Conversion tracking tab scans your site and shows side by side whether the tag is in place, whether it belongs to your account, and whether records came in over the last 30 days.
- When you click a keyword's Quality Score, it diagnoses whether the low score comes from the ad text or the landing page; if the page redirects to the home page, it says so.
- Every change you make is saved to the history and can be undone in one click. A negative added by mistake is fixed before it turns into lost budget.
Frequently asked questions
If I raise the budget, won't more customers come?
If part of the budget goes to irrelevant searches, the extra money you add goes there in the same proportion. Closing the leak first and raising the budget afterwards means more customers for the same money.
How often should I check the search terms?
Weekly in the first month of a new campaign, then every two weeks once the account has settled. If you use broad match, keeping that frequency matters even more.
Will adding many negative keywords stop my ad?
Well-chosen negatives only cut irrelevant searches. The risk is adding a word that describes the service you sell as a negative; that is why you should check for clashes with your own keywords before adding.
Sources
- About the search terms report, Google Ads Help
- About negative keywords, Google Ads Help
- About advanced location options, Google Ads Help
- About conversion measurement, Google Ads Help