EN
Log in Try free for 14 days
Google Ads

What is CTR? 5 places to look when your click-through rate is low

Picture a carpet cleaning company in Clapham, London. Its ad was shown 10,000 times last month, but only 120 people clicked. The owner says "the ad shows but nobody is interested". But is nobody really interested, or is the ad being shown to the wrong people, or telling the right people the wrong thing? The first answer to that question sits in a single number: click-through rate.

In this article we explain what click-through rate (CTR) is, why it affects both your cost per click and your ad's position, and the 5 places to look in your account if it is low. All the information is based on Google's official help pages; example figures are marked as examples.

Short answer

Click-through rate (CTR) shows how often people who see your ad end up clicking it: clicks ÷ impressions. For example, 5 clicks from 100 impressions is a 5% CTR. Google says a good CTR is relative to what you are advertising and on which networks; there is no universal threshold. If CTR is low, check in this order: irrelevant searches, ad copy, keyword grouping, ad assets, and whether your comparison is fair.

What is CTR (click-through rate)?

Google's definition: a ratio showing how often people who see your ad or free product listing end up clicking it. The calculation is clicks ÷ impressions = CTR. With 5 clicks and 100 impressions, CTR is 5%. Each of your ads, keywords and listings has its own CTR listed in your account.

In our opening example CTR is 120 ÷ 10,000 = 1.2%. But that number alone doesn't say "good" or "bad". Google states clearly that a good CTR is relative to what you're advertising and on which networks. Even within one account, the CTR on a brand-name search is very different from that on a general service search.

Example · 1,000 impressionsFrom impression to conversion: someone drops out at every step

Figures are examples for illustration; bar lengths are not to scale. CTR measures the step before the click. What happens after the click (a call, a form) is measured by the conversion rate.

Why does CTR matter?

Two reasons. First, CTR is the fastest answer to "do users find your ad and keyword useful and relevant?" Second, CTR contributes to your keyword's expected CTR, which is one of the three components of Quality Score and part of the quality assessment Google uses in Ad Rank. According to Google, higher quality ads can often lead to lower costs per click. So a low CTR can mean not just "few people click" but also a lower position and pricier clicks for the same bid. See our Quality Score article for details.

5 places to look if CTR is low

1. Who is your ad shown to?

The denominator of CTR is impressions. If your ad also shows on searches unrelated to your business, those people won't click and the impression count balloons; CTR falls. If the company in our example advertises on "carpet cleaning", it may also appear for "how to clean a carpet", "rent a carpet cleaning machine" or "carpet cleaning job".

What to do: Check the search terms report; Google provides it so you can see the real searches that triggered your ad and gather negative keyword ideas. Negatives added from the report are added as exact match by default in Search campaigns; to change the match type you need to use symbols. Also remember that a negative broad match keyword doesn't block close variants.

2. Does the ad copy speak to the searched phrase?

Google's Quality Score guide suggests the following when expected CTR is low: make your offer more compelling to your target audience, make sure ad details match the intent behind your keywords, highlight a unique benefit, use calls to action such as "Buy", "Order", "Find", "Try" and "Get a Quote", and be more specific in your ad text.

Example ad · search: "carpet cleaning clapham"Same service, two different texts

Generic textText tailored to the search

Texts and rates are examples for illustration and aren't taken from a real account. Ad headlines can be up to 30 characters and descriptions up to 90.

Note: Google also says that a more specific ad may lower CTR but raise conversion rates. The aim isn't simply more clicks but the right person clicking. A word like "free" brings plenty of clicks that don't convert.

3. Are your keywords split into themes?

If an ad group holds many unrelated keywords, one ad can't fit them all. Google suggests splitting groups by product, service or category theme and writing each group's ad for that theme; for example, "engagement rings" and "wedding bands" belong in separate groups. The closer the ad is to the phrase in the search, the more it gets clicked.

4. Are you using ad assets?

Assets such as sitelinks and calls add extra content to your ad and make it more prominent on the results page. Google says assets often increase your total number of clicks and recommends adding 4 or more asset types. Two warnings:

  • Assets are shown only when they are predicted to improve the ad's performance; an approved asset isn't guaranteed to appear.
  • Showing additional assets requires a minimum Ad Rank; sometimes a higher bid, better ad quality or both may be needed.

5. Are you comparing against the right thing?

Finally, compare your CTR against your own conditions. A brand-name search naturally has a higher CTR than a general service search, and an ad on one network should be read with different expectations from one on another. Before interpreting a CTR that looks low, check:

  1. Which campaign and which network? Compare like with like.
  2. Is the "Expected CTR" component of Quality Score "Below average"? If not, the problem may lie in the comparison more than in the ad.
  3. What are the conversion rate and cost per conversion? A keyword with low CTR that converts well may not need "fixing". See our CPA article for that.

Which row to start with?

Reading CTR as one number for the whole account misleads; a handful of rows take most of the impressions. Google also says CTR is calculated separately for ads, keywords and listings and can be used to find which work and which need improvement. The order we suggest:

  1. Sort keywords by impressions over the last 30 days. The CTR of a keyword with few impressions moves by chance.
  2. Among the top 10 keywords by impressions, mark those with a CTR clearly below the account average.
  3. For each, look at the search terms first (are there irrelevant impressions?), then at whether the ad copy matches the search.
  4. Change one thing at a time and wait at least two weeks. If you change both text and keywords at once you can't tell which one worked.

Google also suggests using Quality Score alongside other metrics (CTR, conversion rate, site engagement) and looking for patterns across low scores and component ratings in the account to plan long-term fixes. It is the same logic: look not at one number but at what the numbers say together.

How to do this in AdMergen

  • Account analysis: flags keywords and ads whose click-through rate stays very low as recommendations, and shows what to do with a health score and priority order.
  • Adding negatives from search terms: select irrelevant searches and add them as negatives in one click; before adding, AdMergen checks for conflicts with your own active keywords.
  • Ad copy editing and AI suggestions: you edit a responsive search ad's headlines and descriptions within the character limits; AI suggestions flag claims that don't appear in the ad or on the landing page.
  • Ad asset suggestions: suggestions for missing assets and ad elements.
  • Quality Score diagnosis: if expected CTR is low, shows whether the cause is the ad copy or the landing page.
  • Assistant: ask "Which keywords have a low click-through rate?" by typing or voice; the answer comes from your own account's data.
  • History and undo: every change is saved and undone in one click.

Frequently asked questions

What percentage is a good click-through rate?

Google gives no universal number: a good CTR depends on what you advertise and on which networks. Compare like-for-like campaigns in your own account and your own history.

CTR is high but there are no conversions. What is wrong?

The problem may be in the step after the click: the landing page, conversion tracking or the wrong audience. CTR only measures the click. An ad with a very broad promise can also get many clicks and few conversions. Check the conversion rate and conversion tracking separately.

If CTR is low, is Quality Score low too?

Not one-to-one, but expected CTR is a Quality Score component. If that component is "Below average", your ad position and cost per click can be hurt. Start by looking at the component status in the Quality Score columns.

Does adding negative keywords raise CTR?

If you cut impressions on irrelevant searches, the impression count falls and the share of interested people rises, so CTR is expected to rise. But that is not a rule; it is an effect to verify account by account.

Sources

  1. Clickthrough rate (CTR): Definition, Google Ads Help
  2. 5 ways to use Quality Score to improve performance, Google Ads Help
  3. About Ad Rank, Google Ads Help
  4. About assets, Google Ads Help
  5. Get negative keyword ideas using the search terms report, Google Ads Help
  6. Fix issues with negative keywords, Google Ads Help
Eray Şimşek

Google Ads and digital marketing consultant. He builds AdMergen so that anyone can run the checks he repeats every week on the ad accounts he manages. eraysimsek.com